LPG Cylinder Revalidation LPG Transfering Device
1. Application:
The LPG Cylinder residual liquid recovery device is used for the recovery of the residual liquid of LPG cylinder. It adopts the negative pressre method, which uses a vacuum pump to draw the residual liquid, and pumps the pressure in the gas-liquid separator to a negative state. Then enter gas liquid seperator, and then draw the residual gas through the pipeline into the nozzle for combustion
2. Features:
a. Reasonable structure design
b. Simple operation
c. High efficiency
d. Reliable operation
e. Low production cost
f. No pollution
3. Main Technical Data
| Gas Liquid Separator |
0.4 m3 |
| Cylinder Working Pressure |
0.4-0.6 MPa |
| Air Source Pressure |
0.6-1 MPa |
| Residual Pumping Power |
7.5 KW |
| Dimension |
3600*1500*1500mm |
| Each Suction Time |
2-3 min |
| Turnover Period |
≤30 seconds |
4. LPG Cylinder Production Flow Chart
- Off-Loading Cylinders - Unload all LPG Cylinders that require re-validation after visual inspection process.
- De-Canting - Transfer all LPG Cylinder gas content to other LPG container to begin re-validation process with empty cylinder.
- Valve Unmounting
-
- If Guard Ring and Foot Ring is Damaged
- Guard Ring and Foot Ring Repair
- Grinding of the Guard Ring and Bottom Ring for making these parts ready to welding in the next steps
- Foot Ring and Guard Ring Production
- Extremely damaged Foot Ring and Guard Ring of the cylinders are re-produced in order to get high success on re-validation process
- Heat Treatment - Heat treatment of the existing cylinder body to clean the outer surface to make it ready to paint.
- Hydro Static Testing of LPG Cylinder - Hydro static testing of LPG Cylinder to check pressure resistance under extreme conditions compared to the usual pressure of the cylinder
- Stamping - Stamping of the test date to the proper place on LPG Cylinder. It depends on the adopted regulation of the manufacturer company
- Shot Blasting - LPG Cylinder is shot blasted with a proper sized blasting material. Shot blasting cleans the surface for the painting operation
- Zinc Coating(optional) - will provide corrosion protection for LPG Cylinders and it will increase lifetime of LPG Cylinders.
- Powder Coating - Powder coated on the LPG Cylinder surface with manufacturer's RAL coded color.
- Drying - Drying the LPG Cylinder paint.
- Pneumatic Testing - Pressurized air is applied into the LPG Cylinder to check any leakage from the valve.
- Purging the Air - Inside of the cylinder must be eliminated of air. It should have some free expansion area for enabling gas inside of the cylinder.
- Quality Control Inspection - General overall quality of the LPG Cylinders are inspected.
- Dispatch - LPG cylinders dispatched to their respective customers.
5. Company Introduction
Established in 1983, Taizhou Yuehai Manufacturing Co., Ltd is the earliest private manufacturing company, specializing in design, manufacturing, sales of LPG Cylinder Production & Re-validation Line in China.
With more than 30 years' development, the products manufactured by Taizhou Yuehai are not only sold well in China, but also exported to more than 20 countries, such as Egypt, Kenya, Uganda, Libya, the Sudan, Nigeria, Iran, The philippines, Vietnam, Malaysia, Indonesia, Bangladesh, Guatemala, Cuba, and so on.
Our value is to provide high- quality products to our demestic and overseas cleants.
Our business principle is to hour our contract and keep our promise.
6. Our Company
7. Production Machines
8. Certificate and Patent
9. Our Certificate
10. Our Advantages
<> Manufacturer of complete LPG cylinder production line
<> Detailed pre-sales consultation
<> Factory visit available
<> Machines demonstration
<> Reasonable configuration and economical cost
<> Fast delivery
<> On-site installation and training
<> Help with trial production
<> Fast after-sales technical support
<> Fast spare parts delivery
<> Fast dies supply
<> Logo and colors of machine can be customized
11. Overseas Installations
12. Main Clients' Workshop
13. . Please provide the following information for quotation:
<> Technical drawing of cylinders you plan to produce-----
We need to know about the manufacturing process for the enconomical machine configuration.
<> Have you got any machines in your workshop? -----
To see if you need to purchase the complete production line
<> How many cylinders will you plan to produce in 8.5 hours? -----
We will make the quotation according to your required production capacity.
Thanks !
Audited Supplier 
){kind=link}
){kind=link}