LPG Cylinder Surface Shot Blasting Machine
1. Application:
The Shot Blasting Machine is suitable for shot blasting to the surface of all sort of cylinder with diameter of Φ220-420mm
2. Features:
a. Reasonable structure design
b. Simple operation
c. High efficiency
d. Low production cost
3. Working principle
When the LPG cylindes are fed into the projecting area of the cleaning room by an electrically controlled variable-speed-conveyor roller, the cylinder body are hit and rubbed by several powerful impeller heads. The oxidized rust layer and dirt on it are quickly peeled off, and the steel surface has a smooth surface with a certain roughness. The projectiles and rust dust fallin on the cylinder are transported to the projectile circulation system through the recovery screw, and the worhpiece are loaded and unload on the rollers on both sides of the cleaning room.
During the cleaning process, the dropped dust mixture is collected in the lower part of the elevator through the funnel of the chamber and the vertical and horizontal screw conveyor, and then lifted into the seperator in the upper part of the machine. The seperated pure pellets fall into the seperator hopper for cycled supply. Dust generated during shot blasting is sent to the dust removal system by the exhaust pipe. The purified gas is discharged into the atmosphere, however, particulated dust is captured and collected.
4. Composition
1). Impeller head
The single disc shot blasting device is adopted to become the perfect high level shot blasting device in China. It is mainly composed of rotating mechanism, impeller, housing, directional sleeve, shot separator wheel, etc., among which the impeller is made of Cr40 material, and the blade, directional sleeve, shot separator wheel and guard plate are all made of high chromium.
2). Purge device
The device uses a high pressure fan, and the auxiliary chamber of the body is equipped with multiple sets of flexible blowers of different angles to purge and clean the remaining projectiles on the surface of the workpiece.
3). Dust removal system
Cloth bag filter. It is mainly composed of bag filter, fan and pipe. Dust removal efficiency can reach 99.5%
4). Electrical control
The system USES the conventional control to realize the control of the whole machine, adopts the high-quality electrical components produced at home and abroad, has the advantages of high reliability and easy maintenance, etc., the main circuit by miniature circuit breaker and thermal relay to realize the short circuit, short phase, overload protection of each motor.
5. Main Technical Data
| Workpiece dimension |
Φ220-420mm |
| Work rate |
80-120 pcs/hour |
| Impeller head |
4 sets |
| Shotblasting Capacity |
4*2.5T/min |
| Impeller head power |
4*11 KW |
| Elevating Capacity |
15 T/hour |
| Elevator Power |
4 KW |
| Seperating Capacity |
70 T/h |
| Seperator Power |
4 KW |
| Total Power(Excludes Dusting Device) |
26 KW |
| Surface Cleaning Grade |
Sa2-2.5 |
| Total Ventilation Quantity |
8500 m3/h |
| Machine Dimension |
7450*4100*5906 mm |
6. LPG Cylinder Production Flow Chart
7. LPG Cylinder Revalidation Line
8. Company Introduction
Established in 1983, Taizhou Yuehai Manufacturing Co., Ltd is specialising in design, manufacturing, testing, assembly and commissioning of LPG Cylinder Production & Re-validation Line and LPG& LNG & Liquified Gas Storage Tanks.
With more than 30 years' development, LPG Cylinder production line manufactured by Taizhou Yuehai are not only sold well in China, but also exported to more than 20 countries, such as Egypt, Kenya, Uganda, Libya, the Sudan, Nigeria, Iran, The philippines, Vietnam, Malaysia, Indonesia, Bangladesh, Guatemala, Cuba, and so on.
Our value is to provide high- quality products to our demestic and overseas cleants.
Our business principle is to hour our contract and keep our promise.
Our main speciality is we manufacture complete lpg cylinder production & revalidation line.
9. Our Company
10. Production Machines
11. Our Service
<> Pre-sales Consulation
<> Factory visit available
<> Machines Demonstration
<> Reasonable configuration
<> Fast delivery
<> One-year gurantee
<> On-site Installation and training
<> Help with trial production
<> Fast After-sales technical support
<> Fast spare parts delivery
<> Fast die delivery
<> Logo and colors of machine can be customized
12. Overseas Installations
13. Clients' Workshps
14. We need to know the following information before quotation:
<> Technical drawing of cylinders you plan to produce, if possible
<> What specification of cylinder you plan to produce( 6 kg, 12 kg or others)?
<> Are you a newcomer in this line or you have had some machine in your workshop?
<> How many cylinders will you plan to produce per 8.5-hou shift?
If you have any questions, please feel free to contact us by
Audited Supplier 
){kind=link}
){kind=link}